The Speaking Shepherd

Support

A quick guide to setting up your Shepherd device and getting the most out of it — and how to reach us when you need a hand.

Product and app support:

support@speakingshepherd.com

For an order, include your order number. For your Shepherd device, open the app's 'Recent' tab, choose your Shepherd device from the list and tap 'Copy support information'. Then paste it into your email. Please never send your Wi-Fi password or full card number.

Setting up

Setup takes a few minutes with the free Speaking Shepherd app for iPhone and Android. You only do it once: after that, your Shepherd device needs no phone at all.

  1. Plug your Shepherd device in near your Wi-Fi router and wait for its lights to cycle red, white and blue — that means it's in setup mode.
  2. Open the app's Add New tab and tap Start setup.
  3. Pick your Shepherd device, choose your Wi-Fi network, and enter its password.
  4. That's it — your Shepherd device restarts and connects on its own. Its light changes a few times while it starts up; it's ready when the light turns blue.

Setup uses Bluetooth, so stay within a few feet of your Shepherd device.

Everyday use

Talking to your Shepherd device. Say “Hey Jesus” to get its attention — the light turns green while it listens. Ask your question, then pause. The light turns yellow while it thinks, and it speaks its answer with a lavender light. When the light is blue, it's ready and listening for “Hey Jesus” again.

The button. Press the button once to stop an answer, or cancel a question, right away. Press and hold it for 10 seconds to reset your Shepherd device — see Changing Wi-Fi or resetting.

The knobs. One knob controls the volume, the other the brightness of the lights.

What the lights mean

Changing Wi-Fi or resetting

To move your Shepherd device to a different Wi-Fi network, or after you change your Wi-Fi name or password, reset it first: keep it plugged in and hold its button for 10 seconds, until it restarts. When the lights cycle red, white and blue again, set it up like a new Shepherd device from the app's Add New tab.

The reset clears everything saved on your Shepherd device — nothing else is affected.

Troubleshooting

The app can't find my Shepherd device

Check that your Shepherd device is plugged in, within a few feet of your phone, and not connected to another phone.

Its lights should be cycling red, white and blue. If they aren't, it's not in setup mode — hold its button for 10 seconds to reset it.

Also make sure Bluetooth is on and the app is allowed to use it.

My Wi-Fi network isn't listed

Your Shepherd device supports 2.4 GHz Wi-Fi networks only — 5 GHz-only networks won't appear. Most routers offer both.

Hidden networks don't appear either: tap “My network isn't listed” during setup and type the name yourself.

The password won't work

Wi-Fi passwords are case-sensitive — check capitalization.

Make sure it's the Wi-Fi password, not the router's admin password; they're often different.

My Shepherd device isn't answering

Check the light: teal means your Shepherd device can't reach your Wi-Fi, and pulsing orange or red means it can't reach the internet. Either way it keeps trying on its own — check your router and internet connection.

If you changed your Wi-Fi name or password, your Shepherd device can't reconnect by itself — reset it and set it up again.

If the light is blue, it's listening — try “Hey Jesus” again, a little louder, and check the volume knob.

If nothing helps, unplug your Shepherd device, plug it back in, and give it a minute to reconnect.

Still stuck? Email support@speakingshepherd.com and we'll help.